SQ Inductor Series
Compact Flat Wire Inductor for High Current Power Conversion
SQ2918 flat wire inductor with two visible copper winding sections, a green magnetic structure, a dark lower support and two visible lead terminals for project-specific power electronics evaluation.
Product Introduction
The SQ2918 component shown in the reference image is a flat wire power inductor with a compact rectangular body and two visible copper winding sections. The image also shows a green upper magnetic structure, a dark lower support and two lead terminals extending from the base.
This SQ Inductor can be evaluated for high current power conversion designs such as industrial inverters, photovoltaic power systems, telecommunication power equipment, AI server power and EV charging equipment. Final selection requires confirmation of the electrical and mechanical requirements for the target circuit.
Product Specifications
The table identifies the features visible in the supplied image and keeps all unprovided technical values open for confirmation. No numerical electrical rating has been assigned without source data.
| Parameter | Value / Status |
|---|---|
| Product model | SQ2918 |
| Product type | Flat wire power inductor |
| Product family | SQ Inductor |
| Winding form | Two visible copper winding sections |
| Winding conductor | Flat wire appearance is visible; exact conductor specification: please consult |
| Core / magnetic structure | Green magnetic structure is visible; exact material: please consult |
| Body structure | Compact rectangular assembly shown in the reference image |
| Lower support | Dark lower support or fixing structure is visible; exact material: please consult |
| Terminals | Two visible lead terminals |
| Inductance | Customizable; please consult |
| Rated current | Customizable; please consult |
| Saturation current | Please consult according to the core and winding design |
| Operating frequency | Customizable; please consult |
| DC resistance | Customizable; please consult |
| Core material | Customizable; please consult |
| Wire dimensions | Customizable; please consult |
| Winding configuration | Customizable; please consult |
| Overall dimensions | Customizable; please consult |
| Operating temperature | Please consult |
| Insulation requirement | Customizable; please consult according to the application |
| Compliance documentation | Please consult for the applicable model and project requirements |
Product Features
Flat Wire Winding
The supplied image clearly shows broad, closely arranged copper-colored winding sections suitable for flat wire inductor evaluation.
Compact SQ Structure
The SQ2918 assembly has a compact rectangular profile with the magnetic structure and windings integrated into one component.
High Current Design Review
The component can be reviewed for high current applications after the required current, inductance, frequency and thermal conditions are confirmed.
Through-Lead Connection
Two lead terminals are visible at the bottom of the component; the final terminal geometry and pin spacing require confirmation.
Product Applications
The SQ2918 Flat Wire Power Inductor can be technically evaluated for the following applications, subject to confirmed electrical, thermal and mechanical requirements:
Application suitability is not determined by the image alone. Please confirm the circuit topology, current waveform, operating frequency, thermal environment and available installation space before approval.
Advantages
Company Advantages
Product Advantages
Frequently Asked Questions
Yes. Inductance, rated current, operating frequency, wire dimensions, core material, winding configuration, overall dimensions, terminals and insulation requirements can be reviewed for customization.
Please provide the target inductance, rated current or current waveform, operating frequency, DC resistance target if available, dimensions, terminal requirements, ambient temperature and application. A circuit drawing is helpful for technical evaluation.
The supplied image identifies the component as SQ2918 and shows a flat wire winding structure. High current suitability must be confirmed from the required current, inductance, thermal conditions and test requirements.
Sample support can be discussed after the design requirements are reviewed. Sample quantity, sample charge and sample schedule depend on the confirmed construction and testing requirements.
Lead time is confirmed case by case after the specification, sample approval, order quantity and production schedule are reviewed. Please consult us for a project-specific schedule.
Quality requirements are reviewed according to the confirmed specification and project requirements. Inspection items, test conditions and available quality documentation should be agreed before production.
Packaging should be confirmed according to the winding protection needs, terminal protection, shipping method and order quantity. Please consult us for the proposed packaging arrangement for your project.
We support T/T, PayPal and Western Union. Payment terms and any applicable arrangement are confirmed with the quotation or sales contract.
We can review product or delivery issues based on the order information, confirmed specification and inspection evidence. Please provide the purchase reference, product details, issue description and photos or test records when applicable.
Request a Technical Evaluation
Share your SQ2918 application, target inductance, current conditions, operating frequency, available space and expected quantity. We will review the requirements and confirm the available configuration, sample arrangement and commercial terms.
Supported payment methods: T/T, PayPal and Western Union.
