Quick Link
Quick Contact
Address
No. 234, Changhuang Road, Changping Town, 523586, Dongguan, Guangdong, China
Tel
86-769-83823890
Our Newsletter
Subscribe to our newsletter for discounts and more.
Large Core Custom EE64 High Frequency Transformer Low DCR Stable Inverters
Place of Origin:
China
Brand Name:
CHIPSEN
Certification:
UL/cUL Class B/F/H, VDE, CQC
Model Number:
EE64
Minimum Order Quantity:
1K
Price:
＄1.35-2.68/pieces
Delivery Time:
7-14 work days (Negotiable)
Payment Terms:
T/T
Supply Ability:
10000pcs
Inquiry Now
Get A Quote
Specifications
Highlight Features
Large Core high frequency transformer
,Custom high frequency transformer
,EE64 hf transformer
Isolation Voltage:
Typically 1500V Or Higher
Operating Temperature:
-20°C To +85°C
Pad Size:
20.12*18.5mm
Core Material:
Ferrite
Mounting Type:
Surface Mount
Power:
300W
Product Description
Large Core Custom EE64 High Frequency Transformer Low DCR Stable Inverters
Low DCR Stable Inverters
The values below are common international buyer inquiry references and starting points for engineering discussion. They are not fixed or guaranteed ratings for every EE64 transformer. Final requirements are confirmed through the approved specification, drawing, material system, and customer sample-validation process.
| Industry | Typical Application | Typical Input Requirement | Typical Output Requirement | Typical Power Inquiry | Frequency | Key Parameters Evaluated | Safety and Environmental Focus | Available Customization |
|---|---|---|---|---|---|---|---|---|
| Industrial power supplies | Main transformer for isolated AC DC and DC DC converters | Switched excitation from rectified 85 V to 265 V AC or a specified DC bus | Application-specific isolated output after rectification | Approximately 200 W to 1200 W | Commonly 20 kHz to 200 kHz | Flux density inductance turns ratio leakage DCR AC loss insulation and temperature rise | Creepage clearance surge pollution degree flammability and enclosure temperature | Ferrite grade gap foil or litz winding interleaving shield outputs terminals and thermal design |
| Emergency power and UPS | Inverter transformer battery converter and charger stage | 24 V 48 V 72 V or higher customer-defined DC bus | Isolated high-voltage or low-voltage output | Approximately 300 W to 1500 W | Commonly 20 kHz to 150 kHz | Peak current saturation leakage DCR copper loss core loss and thermal balance | Standby operation surge fault conditions and thermal endurance | Parallel conductors foil precision gap center tap shield insulation busbars and sensors |
| Energy storage systems | PCS transformer and bidirectional battery converter | Battery or high-voltage DC link with defined bidirectional waveform | Isolated DC-link battery or auxiliary output | Approximately 300 W to 2000 W | Commonly 20 kHz to 200 kHz | Flux balance leakage DCR AC resistance capacitance saturation and hotspot temperature | High-voltage separation transients vibration and traceability | Symmetrical winding low-capacitance design foil litz shield gap busbars potting and sensors |
| EV charging equipment | Isolated DC DC stage and power-module transformer | PFC DC link or specified high-voltage or low-voltage bus | Isolated charging bus or auxiliary output | Approximately 300 W to 2000 W | Commonly 30 kHz to 200 kHz | Leakage capacitance AC resistance insulation temperature rise and consistency | Charger insulation surge humidity vibration and traceability | Resonant leakage target reinforced insulation foil litz leads busbars and potting |
| Industrial battery chargers | Main transformer for forklift AGV marine and stationary chargers | Rectified mains or battery-side DC bus | Customer-specified charging output after rectification | Approximately 200 W to 1500 W | Commonly 20 kHz to 150 kHz | Turns ratio current DCR AC loss leakage efficiency contribution and temperature rise | Surge insulation cooling and protective-device coordination | Center-tapped secondary foil litz shield insulation sensors and terminals |
| Industrial drives and robotics | Drive auxiliary supply and high-power isolated conversion | Rectified mains DC link or specified DC input | Isolated DC bus or multiple control outputs | Approximately 150 W to 1000 W | Commonly 20 kHz to 200 kHz | Saturation capacitance leakage DCR EMI temperature rise and vibration | Industrial temperature transients pollution degree and insulation | Low-capacitance winding shield multiple outputs leads brackets and impregnation |
| Telecom and data center power | High-power isolated DC DC and server power modules | 48 V DC bus or high-voltage PFC bus | 12 V 24 V 48 V or application-specific output | Approximately 200 W to 1500 W | Commonly 50 kHz to 250 kHz | AC and DC resistance leakage capacitance core loss and thermal path | Isolation EMC high operating duty traceability and thermal cycling | Foil or litz winding interleaving shield terminals busbars and tightened tolerances |
| Renewable energy inverters | Solar wind and distributed-energy converter stage | High-voltage DC link or renewable-energy bus | Isolated DC link battery interface or auxiliary output | Approximately 300 W to 2000 W | Commonly 20 kHz to 200 kHz | Wide input range flux balance saturation leakage DCR capacitance and thermal margin | Outdoor surge humidity thermal cycling and high-voltage separation | Reinforced insulation low-capacitance design foil litz shield sensors and potting |
| Medical and laboratory power | High-power isolated supply for diagnostic and analytical equipment | Customer-defined PFC bus or DC converter input | Application-specific isolated outputs | Approximately 150 W to 800 W | Commonly 30 kHz to 200 kHz | Creepage clearance dielectric strength capacitance EMI and thermal performance | Coordination with applicable end-equipment requirements | Reinforced insulation low-capacitance winding shield sensors and documented tests |
Major customizable parameters include topology, input range, output voltage and current, operating power, switching frequency, duty cycle, primary inductance, magnetizing current, turns ratio, air gap, peak and RMS current, saturation margin, leakage inductance, DCR, AC winding resistance, capacitance, ferrite material, copper foil, litz or parallel-wire construction, winding sequence, shielding, insulation, terminals, leads, busbars, mounting, temperature sensors, and test criteria.
Product Overview
The EE64 is a large high-frequency ferrite transformer platform intended for medium- and high-power switched-mode power supplies, isolated DC DC converters, inverters, battery chargers, energy-storage systems, industrial drives, renewable-energy equipment, and other power-electronics applications.
The supplied image shows a large rectangular magnetic assembly with substantial visible multi-strand windings, layered insulation, and extended insulating support plates. The construction appears intended for higher-current power conversion, but the exact conductor type, bobbin, ferrite material, air gap, terminations, shielding, and mechanical arrangement cannot be confirmed from the image alone.
EE64 identifies the approximate ferrite-core platform and does not define a fixed power rating. Final capability depends on:
- Converter topology
- Input-voltage range
- Switching waveform and frequency
- Duty cycle
- Flux-density limit
- Ferrite grade
- Air gap
- Winding conductor
- Skin and proximity effects
- Leakage target
- Cooling method
- Ambient temperature
- Insulation system
- Mounting
- Permitted hotspot temperature
Required development information includes topology, input range, switching frequency, duty cycle, output voltage and current, continuous and peak power, primary inductance, turns ratio, current waveforms, leakage target, DCR and AC resistance limits, capacitance target, isolation voltage, creepage, clearance, cooling, dimensions, terminals, applicable requirements, and test plan.
Product Construction
| Construction Item | EE64 Customization Reference |
|---|---|
| Magnetic platform | EE64 ferrite-core platform or approved equivalent selected according to frequency waveform flux density losses and thermal requirements |
| Core material | Power ferrite selected according to switching frequency waveform temperature and core-loss target |
| Core fixing | Tape adhesive clamp bracket or approved mechanical system |
| Winding former | Standard bobbin split bobbin custom former or bobbinless arrangement |
| Winding conductor | Enameled wire parallel conductors litz wire copper foil or combined conductor system |
| Visible winding | The image shows substantial orange multi-strand winding bundles but exact specifications require confirmation |
| Winding arrangement | Layered interleaved sandwich sectional or separated structure |
| Insulation system | Film tape barriers sleeving margins spacers and lead insulation |
| Shielding | Optional electrostatic shield flux band or external magnetic shield |
| Air gap | Ungapped distributed-gap or precision-gapped construction |
| Terminations | Flying leads copper tabs terminals busbars lugs or customized connectors |
| Mechanical support | Insulating plates spacers brackets core restraints and winding reinforcement |
| Impregnation and potting | Varnish partial potting encapsulation or thermally conductive compound |
| Temperature monitoring | Optional thermostat thermistor RTD or other sensor |
| Traceability | Custom model winding identification date code lot code and customer label |
Final core outline, assembly height, support-plate dimensions, winding clearances, terminal positions, mounting points, and tolerances must be confirmed by the approved drawing.
Product Characteristics
Large Core Power Conversion Platform
The EE64 platform provides a larger magnetic cross-section and winding window than smaller EE structures. This can support higher-power inquiries, but no power value is guaranteed without a complete electrical and thermal review.
The EE64 platform provides a larger magnetic cross-section and winding window than smaller EE structures. This can support higher-power inquiries, but no power value is guaranteed without a complete electrical and thermal review.
High Current Winding Options
Copper foil, litz wire, parallel conductors, multi-strand wire, copper tabs, and busbars can be considered to manage RMS current, DCR, skin effect, proximity loss, current sharing, and termination temperature.
Copper foil, litz wire, parallel conductors, multi-strand wire, copper tabs, and busbars can be considered to manage RMS current, DCR, skin effect, proximity loss, current sharing, and termination temperature.
Controlled Leakage Inductance
Interleaving can reduce leakage, while deliberate winding separation can create a specified resonant leakage value. Leakage must be balanced against capacitance, insulation spacing, manufacturability, and thermal performance.
Interleaving can reduce leakage, while deliberate winding separation can create a specified resonant leakage value. Leakage must be balanced against capacitance, insulation spacing, manufacturability, and thermal performance.
Low DCR and AC Resistance Development
Conductor cross-section, strand size, foil thickness, parallel paths, layer arrangement, winding length, and termination design can be reviewed together. DCR alone does not represent total high-frequency winding loss.
Conductor cross-section, strand size, foil thickness, parallel paths, layer arrangement, winding length, and termination design can be reviewed together. DCR alone does not represent total high-frequency winding loss.
EMI and Capacitance Options
Winding sequence, shielding, sectional construction, interwinding spacing, and return paths can be customized to support common-mode-noise objectives. EMC performance must be verified in the complete converter.
Winding sequence, shielding, sectional construction, interwinding spacing, and return paths can be customized to support common-mode-noise objectives. EMC performance must be verified in the complete converter.
Thermal Management Support
Core loss, copper loss, hotspots, insulation thermal conductivity, airflow, conduction cooling, potting, mounting, and sensor position can be reviewed as one thermal system.
Core loss, copper loss, hotspots, insulation thermal conductivity, airflow, conduction cooling, potting, mounting, and sensor position can be reviewed as one thermal system.
Mechanical Reinforcement
Controlled core fixing, winding support, lead strain relief, insulation protection, and mounting can be developed for vibration, transportation, and production handling.
Controlled core fixing, winding support, lead strain relief, insulation protection, and mounting can be developed for vibration, transportation, and production handling.
Applications
- Industrial high-power switched-mode power supplies
- Emergency-power and UPS inverters
- Energy-storage PCS converters
- Bidirectional battery converters
- Solar and renewable-energy inverters
- Industrial battery chargers
- EV charging equipment
- High-power isolated DC DC converters
- Telecom rectifiers and data-center power modules
- Industrial motor drives and robotics
- Welding and industrial power equipment
- Isolated gate-drive and auxiliary power systems
- Medical and laboratory power equipment
- Full-bridge half-bridge push-pull and resonant converters
Suitability must be confirmed according to the actual electrical, thermal, mechanical, environmental, and safety conditions.
Quality Control
Incoming Material Inspection
Inspection may cover ferrite cores, winding formers, copper foil, litz or multi-strand wire, insulation films, tape, barriers, sleeving, terminals, busbars, adhesives, potting materials, sensors, support plates, labels, and supplier documentation.
Inspection may cover ferrite cores, winding formers, copper foil, litz or multi-strand wire, insulation films, tape, barriers, sleeving, terminals, busbars, adhesives, potting materials, sensors, support plates, labels, and supplier documentation.
Design Review
Engineering review can evaluate topology, frequency, volt-second conditions, flux density, magnetizing inductance, peak current, saturation margin, core loss, turns ratio, conductor selection, skin and proximity effects, winding fill, leakage, capacitance, DCR, insulation, creepage, clearance, hotspots, and cooling.
Engineering review can evaluate topology, frequency, volt-second conditions, flux density, magnetizing inductance, peak current, saturation margin, core loss, turns ratio, conductor selection, skin and proximity effects, winding fill, leakage, capacitance, DCR, insulation, creepage, clearance, hotspots, and cooling.
In Process Control
Controls may include turns counting, winding direction, conductor preparation, parallel-path arrangement, foil insulation, winding sequence, tension, interlayer insulation, lead routing, terminal joining, shield installation, gap control, core assembly, sensor placement, impregnation, and potting.
Controls may include turns counting, winding direction, conductor preparation, parallel-path arrangement, foil insulation, winding sequence, tension, interlayer insulation, lead routing, terminal joining, shield installation, gap control, core assembly, sensor placement, impregnation, and potting.
Electrical Testing
Tests may include:
Tests may include:
- Inductance
- Turns ratio and polarity
- Winding DCR
- Leakage inductance
- Dielectric strength
- Insulation resistance
- Interwinding capacitance
- Shorted-turn screening
- Functional converter testing
Test frequency, voltage, current, bias, limits, duration, sampling level, and testing frequency must follow the approved test plan.
Mechanical Inspection
Inspection may cover core dimensions, overall height, support plates, winding clearances, conductor routing, terminals, busbars, insulation coverage, core fixing, sensor location, labels, mounting compatibility, and workmanship.
Inspection may cover core dimensions, overall height, support plates, winding clearances, conductor routing, terminals, busbars, insulation coverage, core fixing, sensor location, labels, mounting compatibility, and workmanship.
Sample Validation
Samples should be tested in the customer's converter across minimum and maximum input, no load, full load, peak load, frequency range, startup, transient, fault, ambient temperature, and cooling conditions.
Samples should be tested in the customer's converter across minimum and maximum input, no load, full load, peak load, frequency range, startup, transient, fault, ambient temperature, and cooling conditions.
Validation may include waveforms, flux balance, peak current, leakage behavior, regulation, efficiency contribution, hotspot temperature, EMI, vibration, and insulation testing.
Traceability
Material lots, ferrite batches, conductor lots, winding batches, gap records, terminal-joining records, test results, and engineering changes can be controlled.
Material lots, ferrite batches, conductor lots, winding batches, gap records, terminal-joining records, test results, and engineering changes can be controlled.
Company Profile
Chipsen specializes in the development and manufacturing of custom magnetic components for industrial equipment power electronics automation systems and electrical control applications.
The product range includes high-frequency transformers low-frequency transformers planar transformers power inductors high-current inductors toroidal inductors common-mode chokes EMI filter magnetics wireless charging coils custom coils and non-standard magnetic components.
Chipsen supports drawing-based development sample-based replacement development and application-requirement design. Engineering discussions can cover low DCR leakage inductance EMI insulation temperature rise winding structure footprint pinout terminals protection devices and production-testing requirements.
The objective is to provide evaluation-ready samples and a clearly defined specification before production approval.
Why Choose Chipsen
Application Specific Customization
The EE64 can be developed around topology, input range, frequency, power profile, current waveform, leakage target, insulation architecture, cooling, terminals, mounting, and operating environment.
The EE64 can be developed around topology, input range, frequency, power profile, current waveform, leakage target, insulation architecture, cooling, terminals, mounting, and operating environment.
OEM and ODM Support
Support is available for new designs, drawing-based manufacturing, sample-based replacement development, and application-based engineering review.
Support is available for new designs, drawing-based manufacturing, sample-based replacement development, and application-based engineering review.
Drawing and Sample Based Development
Chipsen can review an existing drawing or sample. Converter waveforms, operating conditions, and acceptance limits should also be provided.
Chipsen can review an existing drawing or sample. Converter waveforms, operating conditions, and acceptance limits should also be provided.
Engineering Collaboration
Engineering discussions can address inductance, turns ratio, leakage, DCR, AC resistance, gap, conductor system, capacitance, EMI, saturation margin, insulation, hotspots, cooling, terminals, and mounting.
Engineering discussions can address inductance, turns ratio, leakage, DCR, AC resistance, gap, conductor system, capacitance, EMI, saturation margin, insulation, hotspots, cooling, terminals, and mounting.
Flexible Prototype Support
Prototype quantities and schedules are reviewed according to material availability, tooling, terminal requirements, complexity, and specification completeness. No verified MOQ is visible in the image.
Prototype quantities and schedules are reviewed according to material availability, tooling, terminal requirements, complexity, and specification completeness. No verified MOQ is visible in the image.
Responsive Project Handling
Quotation and sample timing are confirmed after complete information is received and the specification, materials, tooling, and thermal-validation requirements are reviewed. No verified timing is visible in the image.
Quotation and sample timing are confirmed after complete information is received and the specification, materials, tooling, and thermal-validation requirements are reviewed. No verified timing is visible in the image.
Warranty Support
Warranty terms are confirmed according to application, operating conditions, validation status, and the written supply agreement. No warranty period is visible in the image.
Warranty terms are confirmed according to application, operating conditions, validation status, and the written supply agreement. No warranty period is visible in the image.
Controlled Specification Process
The approved drawing, electrical specification, material system, validation results, and test plan form the basis for production control.
The approved drawing, electrical specification, material system, validation results, and test plan form the basis for production control.
Mechanical Integration Support
Core outline, winding clearances, support plates, terminals, busbars, leads, mounting points, sensors, potting, and labeling can be reviewed for the customer assembly.
Core outline, winding clearances, support plates, terminals, busbars, leads, mounting points, sensors, potting, and labeling can be reviewed for the customer assembly.
Frequently Asked Questions
Is EE64 a fixed power rating?
No. EE64 identifies an approximate ferrite-core platform. Power capability depends on topology, waveform, frequency, flux density, conductor design, cooling, insulation, and temperature rise.
No. EE64 identifies an approximate ferrite-core platform. Power capability depends on topology, waveform, frequency, flux density, conductor design, cooling, insulation, and temperature rise.
What information is required for quotation?
Please provide topology, input range, frequency, duty cycle, output voltage and current, continuous and peak power, inductance, turns ratio, current waveforms, leakage and resistance limits, isolation, cooling, dimensions, terminals, demand, and tests.
Please provide topology, input range, frequency, duty cycle, output voltage and current, continuous and peak power, inductance, turns ratio, current waveforms, leakage and resistance limits, isolation, cooling, dimensions, terminals, demand, and tests.
Which converter topologies can be supported?
Full-bridge, half-bridge, push-pull, forward, resonant, bidirectional, and other customer-specified topologies may be considered.
Full-bridge, half-bridge, push-pull, forward, resonant, bidirectional, and other customer-specified topologies may be considered.
Can copper foil or litz wire be used?
Yes. Copper foil, litz wire, parallel wire, or combined conductors may be considered according to frequency, current, skin effect, winding space, insulation, and termination requirements.
Yes. Copper foil, litz wire, parallel wire, or combined conductors may be considered according to frequency, current, skin effect, winding space, insulation, and termination requirements.
Can multiple outputs be added?
Yes, when winding space, regulation, current sharing, insulation, and thermal limits permit.
Yes, when winding space, regulation, current sharing, insulation, and thermal limits permit.
Can primary inductance and air gap be customized?
Yes. They can be developed around topology, magnetizing current, peak current, stored energy, saturation margin, and tolerance.
Yes. They can be developed around topology, magnetizing current, peak current, stored energy, saturation margin, and tolerance.
Can leakage inductance be controlled?
Yes. Leakage can be minimized or deliberately designed for a resonant target through winding geometry, separation, interleaving, and insulation.
Yes. Leakage can be minimized or deliberately designed for a resonant target through winding geometry, separation, interleaving, and insulation.
Can DCR and AC resistance be reduced?
They can be optimized through conductor cross-section, strand diameter, foil thickness, parallel paths, winding length, layer arrangement, and terminations.
They can be optimized through conductor cross-section, strand diameter, foil thickness, parallel paths, winding length, layer arrangement, and terminations.
Can an electrostatic shield be added?
Yes. A shield may be added when space, capacitance, insulation, and thermal conditions permit.
Yes. A shield may be added when space, capacitance, insulation, and thermal conditions permit.
Are reinforced-insulation options available?
Reinforced insulation may be developed using suitable spacing, barriers, films, tape, sleeving, or specialized insulated conductors.
Reinforced insulation may be developed using suitable spacing, barriers, films, tape, sleeving, or specialized insulated conductors.
Can terminals leads and busbars be customized?
Yes. Copper tabs, lugs, busbars, flying leads, connectors, strain relief, and mounting can be customized.
Yes. Copper tabs, lugs, busbars, flying leads, connectors, strain relief, and mounting can be customized.
Can temperature sensors be installed?
A thermostat, thermistor, RTD, or other sensor may be included when required.
A thermostat, thermistor, RTD, or other sensor may be included when required.
Can Chipsen develop a replacement from a sample?
Yes. Sample-based development can include mechanical measurement and electrical characterization.
Yes. Sample-based development can include mechanical measurement and electrical characterization.
What tests are available?
Tests may include inductance, turns ratio, polarity, DCR, leakage, dielectric strength, insulation resistance, capacitance, shorted-turn screening, dimensions, thermal testing, and application validation.
Tests may include inductance, turns ratio, polarity, DCR, leakage, dielectric strength, insulation resistance, capacitance, shorted-turn screening, dimensions, thermal testing, and application validation.
Does it automatically comply with an IEC or UL standard?
No. It can be developed to support specified requirements, but certification or end-product compliance is not automatic.
No. It can be developed to support specified requirements, but certification or end-product compliance is not automatic.
What is the MOQ?
MOQ is confirmed according to ferrite, conductor and terminal availability, tooling, complexity, and production requirements.
MOQ is confirmed according to ferrite, conductor and terminal availability, tooling, complexity, and production requirements.
What is the quotation and sample time?
Timing is confirmed after complete electrical, mechanical, insulation, thermal, and commercial information has been reviewed.
Timing is confirmed after complete electrical, mechanical, insulation, thermal, and commercial information has been reviewed.
What warranty is available?
Warranty terms are confirmed according to the application, operating conditions, validation status, and written agreement.
Warranty terms are confirmed according to the application, operating conditions, validation status, and written agreement.
The EE64 model or ferrite-core platform does not by itself define a fixed power, voltage, current, frequency, insulation, or thermal rating. Final performance is confirmed only through the approved drawing, electrical specification, material system, test plan, and customer sample-validation process.
Product Images
Tags:
Related Products
Custom Core EQ40 Planar Transformer for DC-DC Converters Telecom Power SupplyProduct IntroductionThe EQ40 Planar Transformer is a high-performance magnetic component developed by Dongguan Jianyanda Electronics Co., Ltd. specifically to meet high-power-density requirements. Featuring a low-profile ...
1. Product Introduction This high frequency power transformer is built on a PQ type ferrite core and is designed for switching power supplies operating in the tens to hundreds of kilohertz range. The PQ geometry gives a large winding window relative to its footprint and a round centre leg, which ...
High Power Low Loss EE65 High Frequency TransformerStable, efficient transformer designed for UPS systems and high-power isolated energy conversion in switch-mode power supplies, inverters, converters, chargers, and industrial power electronics equipment.Application SpecificationsThe following ...
1. PRODUCT INTRODUCTION This is an integrated magnetic assembly built on PQ series ferrite cores, in which several PQ5033 and PQ5060 magnetic units are wound, assembled and terminated onto a single FR4 base board to form one ready to install module instead of a set of loose discrete components. The ...
